Product Parameters

• Pressure Ranges: 600 Pa (6mb) to 100 kPa (1 bar) differential
• Accuracy: 1% FS BSL
• Output Signals: 3 wire 0-10V, 2 or 3 wire 4-20mA, 3 wire 0-20mA
• Electrical Connection: M12 x1.5 cable gland with 5 internal screw terminals
• Pressure Connections: 6.6mm dia x 11mm for 6mm dia tubing, 4.4mm x 11mm for 4mm dia flexible tubing
• Media Compatibility: Air
• Environmental Protection: IP54
• Dimensions: 131 x 68 x 51 mm
• Weight: approx. 165g
• Special Options: Integrated LCD display, bargraph indicator

Product Description

The DPS 200 ventilation air dp sensor has been designed particularly for measuring draft air pressures in ranges that are typically used in air condition systems for office blocks and factories to monitor airflow.

The DPS200 hvac differential pressure sensor is housed inside a ABS plastic box which can be mounted on the wall or inside an instrument cabinet. An LCD display can be integrated into the front cover of the sensor housing for local indication of the air pressure.

The LCD display can be configured in the factory for reading the pressure in any units such as inches of water, millibar or pascals. The lower portion of the display shows the units the sensor is calibrated to measure and a 52 segment bargraph shows the reading a percentage of the full scale range.

Push-on flexible tube fittings and a M12 x 1.5 cable gland are fitted as standard for installing pressure hoses and electrical wiring connections.

2 or 3 wire 4 to 20 milliamp can be specified for industrial process plant control systems or 0 to 10 volt for commercial building utility management systems.

Download Datasheet